MIL-PRF-63045B (TM)
3.3.5.2 Warning page and table of contents. The warning page and the table of contents shall be
prepared in accordance with MIL-STD-38784.
3.3.6 Chapter 1 - Introduction.
3.3.6.1 Section I - Scope. This section shall contain, as a minimum, the following statement:
"These instructions are for use by depot/contractor personnel. They apply to the (insert
name of equipment) and in case of conflict, take precedence over all other documents
pertinent to its maintenance and repair."
3.3.6.2 Section II - Description and data. This section shall contain the following paragraphs.
3.3.6.2.1 Description. This paragraph shall provide a general description indicating the purpose, use,
capabilities, and features of the test equipment.
3.3.6.2.2 Performance data. This paragraph shall provide performance data for the equipment. It shall
include, as applicable, lists of:
a. Functional characteristics, such as power requirements, sensitivity, and selectivity.
b. Rated output, such as wattage, voltage, horsepower and gallons per minute.
c. Environmental characteristics, such as ambient temperature, humidity limits, ventilation and air
conditioning requirements.
3.3.6.2.3 Configuration data. All models and modifications authorized for the TMDE shall be listed.
Differences between configurations, models, serial or part number groups, and individual items of equipment,
including affected model, part, or serial numbers, shall be described. For equipment with modifications or
minor model differences, the major parts affected shall be briefly described and the number groups, or
registration numbers, and model numbers shall be included.
3.3.6.2.4 Equipment, accessories, and publications required. As applicable, all associated equipment
and publications shall be listed to include:
a. Equipment and accessories (special tools, miscellaneous parts) which form a part of, or are supplied
with, the test equipment.
b. All equipment and publications required, but not supplied.
c. Consumable/expendable items and the procedures in which these items are used.
3.3.7 Chapter 2 - Functional analysis. The structure and organization of this chapter shall parallel the
section on troubleshooting (3.3.9.4). The functional analysis shall present an overall operational sequence of
the equipment and show the functional relationship between major components or units. Functional diagrams
shall be used as the primary means of communication for this chapter; the text shall be used only to support
the diagrams as necessary for clarity. Functional diagrams shall depict the development of each equipment
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business