fire munitions and weapons that are approved for loading on an aircraft. This specification provides for electronic delivery of data through the use of the Document Type Definitions \(DTD\) contained in Appendixes A through K \(see 6.2\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18

MIL-DTL-9977L(USAF)

APPENDIX J

NATO STAGE B CROSS-SERVICING CHECKLIST (CL2 AND SUBSEQUENT)

DOCUMENT TYPE DEFINITION (DTD) SUBSET

J.1 SCOPE.

J.1.1 Scope. DTDs are based on rules outlined in MIL-PRF-28001 and ISO 8879. The DTD subset

referenced within this appendix provides the structure and content templates of documents prepared in

accordance with this detail speciication. For digital copies of the DTD, Tag Description Table (TDT),

and the Attribute Description Table (ADT), see J.4.1. This appendix is a mandatory part of this detail

speciication. The information herein is intended for compliance.

J.2 APPLICABLE DOCUMENTS.

J.2.1 General. The documents listed in this section are speciied in sections 3, 4, or 5 of this speciication.

This section does not include documents cited in other sections of this speciication or recommended for

additional information or as examples. While every effort has been made to ensure the completeness of this

list, document users are cautioned that they must meet all speciied requirements of documents cited in

sections 3, 4, or 5 of this speciication, whether or not they are listed.

J.2.2 Goverment documents.

J.2.2.1 Speciications, standards, and handbooks. The following speciications and standards form a part of

this document to the extent speciied herein. Unless otherwise speciied, the issues of these documents are

those cited in the solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-28001

Markup Requirements and Generic Style Speciication for

Electronic Printed Output and Exchange of Text

(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

J.2.3 Non-government publications.

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION

ISO 8879 (DoD adopted) Information Processing - Text and

Ofice Systems - Standard Generalized

Markup Language (SGML)

(Copies of this document are available for purchase online at https://www.ansi.org or may be ordered by mail

from the American National Standards Institute, 1819 L. Street, NW, US-Washington, DC 20036.)

J.3 DIGITAL SUPPORT SUITE (DSS).

The following comprise the tools contained in the DSS used for authoring and rendering the Checklist (CL-2

and subsequent) arrangement doctype.

J.3.1 Document Type Deinition. to be delivered digitally in accordance with this speciication shall be

tagged using the Checklist (CL-2 and subsequent) arrangement manual DTD found at the TMSS website (see

J.4.1). This DTD provides the structure and content template in accordance with the detail speciication. The

procedure for accomplishing this is found in MIL-PRF-28001 and ISO 8879.

J.3.2 Tag Description Table. TDT provides detailed descriptions of the elements contained in the Checklist

(CL-2 and subsequent) arrangement DTD. The TDT contains the element tagging structure, full element

name, tag minimization requirements, element structure, reference elements, source paragraph, and attribute

descriptions unique to the element. See J.4.1 for information on obtaining this ile in digital format.

J.3.3 Attribute Description Table. ATD provides detailed descriptions of the attributes contained in

the Checklist (CL-2 and subsequent) arrangement DTD. See J.4.1 for information on obtaining this

ile in digital format.