MIL-DTL-83495C (USAF)
task step shall correspond, callout number 2 and the second step shall correspond, etc. Callouts used on the
illustration for clariication shall not be keyed to the text. Multiple key identiication numbers shall be used
when the callout is applicable to more than one step. Leader lines or sweep arrows shall be used to help
the reader orient themselves with respect to the illustration. Leader lines shall be used to connect callouts
and identiication numbers. When an equipment item is irst called out in a task, and its location has not yet
been speciied, a general location illustration shall be used to identify the position of the item within the
system. In addition, the following shall be followed for the speciic situations indicated: Illustrations which
apply to more than one component or sub-subsystem shall be identiied by the word "TYPICAL" placed
near the bottom center of the illustration. igure numbers shall not be used for JG task illustrations.
a. Electronic media requirement: The task title shall have some linking method to bring up the
appropriate graphic associated with that task.
b. Print media requirement:
1. Two tasks using the same illustration shall be included on the same page if both can
be included without crowding. Index numbers for the second task shall be sufixed
with the letter "A" and subsequent.
2. If the associated illustration occupies less than its allotted space, textual information shall be
continued on the top right-hand page, without crowding.
3. Illustrations shall be rotated 90 degrees counterclockwise to preclude the use of a foldout
page or to be compatible with rotated text.
4. Illustrations for multi-page tasks shall be held to a minimum. Illustrations supporting
multi-page tasks, when required, shall be located on a right-hand foldout page at the end of
the task and shall have a blank apron.
3.4.4 JG index manual. The applicable SSSN shall be provided in parenthesis following each system,
subsystem, sub-subsystem, equipment nomenclature, or item listed (e.g., Title (SSSN) ; JG Number; Chapter).
This manual shall be numbered as the irst job guide manual, e.g., 1F-1A-2-00JG-00-1.
Electronic media requirement: Alphabetical listing for all systems should have linking capabilities to
job guide and chapter where possible.
Print media requirements: This manual shall contain an alphabetical listing of all systems, subsystems,
sub-subsystems, equipment nomenclatures, and items covered in the job guide manual set. The listing shall
cross-reference the applicable job guide number and chapter number.
3.5 Fault reporting (FR) and fault isolation (FI) manuals. These manuals shall provide equipment fault
isolation and fault reporting information, and are to be used in conjunction with each other. FI and FR
manuals shall be updated or revised concurrently. Combined manuals shall be prepared if speciied
by the acquiring activity (see 6.2r.).
Electronic media requirements: Page count requirements do not apply.
Print media requirements: Combined manuals shall not exceed 800 page units (including foldouts).
3.5.1 Scope. The FR manual shall identify detailed equipment malfunctions. The FI manual shall provide
the fault analysis and identify the corrective action(s) for malfunctions listed in the FR manual. Fault
isolation information shall be provided for any fault which requires troubleshooting, including maintenance
observable faults while the equipment is in operation. Speciic fault codes shall be assigned to those
malfunctions identiied through the supportability failure modes analysis.
3.5.2 General requirements.
3.5.2.1 Manual form. Electronic media requirements: Page size requirements do not apply.
Print media requirements: Page size shall be 8½ x 11 inches. Presentations shall be vertical on the page. FI
manual schematics shall be horizontal, when required.
3.5.2.2 FR manual numbering. The chapter number and title shall be the system number and title
from MIL-STD-1808.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business