MIL-DTL-83495C (USAF)
c. Inspections and treatments during storage
d. Removal from storage
e. Procedures for moving or lying a system to an overhaul/maintenance facility
3.2.3.2.6.1 Equipment storage arrangement.
Section I Introduction.
Purpose.
Types of Storage.
General Instructions.
Special Tools and Test Equipment.
Section II Temporary Storage.
Preparation and Securing.
Inspection and Treatment During Storage.
Removal.
Section III Extended Storage.
Preparation and Securing.
Inspection and Treatment During Storage.
Removal.
Moving or Flying System to Another Location.
3.2.3.2.6.1.1 Required storage equipment. Designs or part numbers with sources for material or equipment
needed to process the system shall be given. This shall include stands needed to store components in or
near a system. A tabular format of special tools and test equipment shall be prepared and listed
according to 3.3.5.3.2.1. Electronic Media: When the table spans more than one screen, the table
shall be formatted as a scrolling table
3.2.3.2.6.1.2 Temporary storage. The section on temporary storage shall include the location of protective
covers and tie-down points. Any other procedures necessary to protect the system during temporary
storage shall be given.
3.2.3.2.6.1.3 Extended storage. This section shall contain diagrams of the equipment exterior and
instructions which give the following:
a. Openings that must be sealed from rain and dust.
b. Location of vent tubes or drain holes.
c. Location of acrylic windows which need protection from sunlight.
d. Tie-down points and cable strength.
e. General location of unpainted metal surfaces which need protection.
f. Location of fuselage drain plugs on amphibious aircraft shall be shown or referenced.
g. The type preservative or protection required.
3.2.3.2.7 Chapter 15, support equipment. This chapter shall contain specialized Support Equipment (SE)
information required to maintain or to test the equipment or systems. Common or standard SE shall not be
included. When speciied, associated JG manuals shall be prepared (see 6.2f.). Electronic Media: When
references are made to the associated JG manual, these references shall link to the associated manual.
3.2.3.2.8 Chapter 16, siting installation. When speciied, (see 6.2g.) this chapter shall provide installation
data, in the form of text, illustrations, tables, and charts for equipment (e.g., ground CE) and shall
be divided into the following sections:
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business