MIL-DTL-83495C (USAF)
Section I
Installation Logistics.
Section II
Installation Procedures.
3.2.3.2.8.1 Section I, installation logistics. This section shall contain information relative to unloading,
unpacking, housing, and storage of equipment prior to and during installation.
3.2.3.2.8.1.1 Unloading and unpacking. Unloading instructions shall include tie-down cable removal,
strapping or blocking, and equipment securing procedures with illustrations. All precautions to be observed
when removing equipment from shipping devices shall be provided. If necessary, procedures to remove the
equipment and accessories packaging shall be stated. Storage and accountability of reusable equipment,
covers, protectors, cases, special containers, etc., shall be included.
3.2.3.2.8.1.2 Required equipment list. Crated and uncrated dimensions and weights of equipment and parts
shall be indicated. Where applicable, the purpose and a brief description of each major group, e.g., antenna
group, shall be provided. A table shall list all the supplied assemblies, components, units, cables, etc., by
oficial nomenclature (if such exists) and common names. The listing shall include mounting hardware,
gaskets, shims, air duct hoods, ittings, cabinet hardware, etc. A list of equipment required, but not supplied
by the contractor, shall be included. Equipment required for service or installation of the equipment shall be
identiied by the manufacturer, including Government Furnished Property (GFP). Electronic Media: if the
table spans more than one screen the table shall be formatted as a scrolling screen.
3.2.3.2.8.1.3 Material handling equipment. Equipment required to transport, handle, and aid in the
installation shall be identiied.
3.2.3.2.8.1.4 Cables. A table listing of interconnecting power and remote control cable assemblies, shall be
prepared, as required. Instructions shall include the fabrication of cable assemblies not supplied, critical
cable lengths, and technical characteristics. Electronic Media: if the table spans more than one screen
the table shall be formatted as a scrolling table.
3.2.3.2.8.2 Section II, installation procedures. This section shall contain installation requirements to ensure
operational performance. Man-hours and manpower requirements shall be listed for all phases of the
installation, if variables exist. Installation procedures and sequencing shall be suficient for ield installation.
3.2.3.2.8.2.1 Installation requirements. Information required to support the equipment installation, e.g.,
antenna towers and radomes, including a table showing guying tension in pounds, sag, vibration limits at
various ambient temperatures, etc., shall be provided. Electronic Media: if the table spans more than one
screen the table shall be formatted as a scrolling table.
3.2.3.2.8.2.2 Installation sequence. Step-by-step procedures required to accomplish assembly, installation, and
interconnection of equipment parts shall be stated. Illustrations shall be included, as required. Procedures
shall be divided into applicable headings, e.g., power generating equipment, antenna and waveguide (or
antenna cables) systems, transmitters, receivers.
3.2.3.2.9 Chapter 17, preparation for use and shipment. When speciied (see 6.2h.), this chapter shall
provide preparation instructions for use and shipment. Illustrations, tables, and charts, as required, shall be
provided. The chapter shall be divided into the following sections:
Section I
Preparation for Use.
Section II
Preparation for Shipment.
3.2.3.2.9.1 Section I, preparation for use. Tune-up, testing, and adjustment instructions required to make
the equipment operational shall be provided. Required illustrations shall be included. Instructions located
elsewhere, shall be referenced. Electronic Media: References shall be linked to the data to which
they apply. This section shall include:
a. Test descriptions needed to demonstrate all functional requirements.
b. Procedures to determine performance levels and to record test data.
c. A sequence list of all tests, including light and electronic countermeasure testing.
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business