MIL-DTL-83495C (USAF)
Chapter 13
Equipment Storage
Chapter 14
Corrosion Control
Chapter 15
Non-destructive Inspection
Chapter 16
Siting Installation
Chapter 17
Preparation for Use and Shipment
Chapter 18
Weapons Instrumentation
Chapter 19
Training Equipment
3.2.3.1 Front matter. Front matter shall be prepared in accordance with MIL-STD-38784 and applicable
requirements speciied herein (see 3.1).
3.2.3.1.1 Foreword. The foreword shall identify the equipment applicability by Government or manufacturers
type designation and provide a brief explanation of the manual s purpose, scope and arrangement, including any
relevant information that will increase the usability of the manual. An explanation of "shall,"will," "should,"
and "may" as deined in MIL-STD-38784 shall be provided. An overview and detailed explanation of the
OMMS use, technical order numbering and assignment of higher level designations (see MIL-HDBK-863) as
they relate to a functional system, deinition of a functional system, and a detailed explanation and intended
use of each type manual shall be provided. Illustrations shall be used to assist in explanation, as required.
3.2.3.2 Chapters. Chapters shall be constructed in accordance with MIL-STD-1808 numbering. Chapter
numbers shall remain as speciied in 3.2.3, however, the table of contents shall list unused chapters as "Not
Used". Unused chapter numbers and titles shall not be included in the manual or referenced in the text.
3.2.3.2.1 Chapter 00, general equipment description. Chapter 00 shall provide a general description of
the equipment and installed systems, as well as applicable safety and protective devices. The general
arrangement, principal dimensions, station diagrams (if required), pictorial diagrams (e.g., walkways, access,
danger areas, equipment location, cable routing), and any capabilities or limitations peculiar to the equipment
(e.g., ambient operating temperatures, relative humidity, operating and nonoperating barometric pressures, wind
loading, ice loading, fatigue life calculations) shall be provided. First level equipment block diagrams, with
supporting illustrations, shall be used to aid understanding. Associated JG manuals shall not be prepared.
3.2.3.2.2 Chapters 1, 2, 3, and 4, reserved. These chapters are reserved for additional requirements as
speciied by the acquiring activity (See 6.2d.).
3.2.3.2.3 Chapters 5 and 8. These chapters are for reference only and shall reference the -6 inspection
manual (both scheduled and unscheduled), -5 series manuals, and cargo/munitions loading manuals. Electronic
media requirement: References shall be linked to the data to which they apply.
3.2.3.2.4 Chapter 6, dimensions and areas, chapter 11 placards and markings. These chapters shall provide
the information required by MIL-STD-1808. Associated JG manuals shall not be prepared.
3.2.3.2.5 Chapters 7, 9, 10, and 12. These chapters shall provide the information required by MIL-STD-1808
and shall have associated JG manuals prepared. Electronic media requirement: When references are made to
the associated JG manual, these references shall link to the associated manual.
3.2.3.2.6 Chapter 13, equipment storage. The introduction shall explain the purpose of the chapter and
shall reference TO 1-1-17 as a source of additional general information, and shall include relevant
information needed to use the manual. If the information in TO 1-1-17 is not suficient, the equipment
storage chapter shall contain the information needed to supplement TO 1-1-17. Unless otherwise speciied,
associated JG manuals shall be prepared (see 6.2e.). Electronic Media: When references are made to the
associated JG manual, these references shall link to the associated manual. This chapter shall include
instructions to process equipment for:
a. Temporary storage
b. Extended storage (over 90 days)
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business