MIL-DTL-83495C (USAF)
(see igure 11).
3.6 Wiring data (WD) manual. The wiring data manual shall provide wiring information for the entire
equipment or system and shall be prepared as a single manual, or separate system manuals, as speciied by
the acquiring activity (see 6.2v.). And shall be developed according to the MIL-HDBK-863. The irst
manual shall contain chapters one through three. Chapter 4 and subsequent shall be prepared by system.
If speciied by the acquiring activity, (see 6.2).
a. Electronic media requirement: count restrictions do not apply.
b. Print media requirement: If the single manual exceeds 800 s (400 sheets), separate system
manuals shall be prepared. The WD manual shall be combined with the SD manual unless the
count exceeds 800 s (400 sheets). Foldout s shall be used only when approved by the acquiring
activity. Diagrams shall be rotated 90 degrees counterclockwise to preclude the use of foldouts.
When used, foldout s shall follow the last applicable text; turn s shall not be used.
3.6.1 Front matter. Front matter shall be prepared in accordance with the requirements of MIL-STD-38784
and applicable requirements speciied herein (see 3.1), except there shall be no list of illustrations.
a. Electronic print requirement: list of diagrams shall link to the data to which it applies
b. Print media requirement: Chapter 4 and subsequent system manuals shall contain no front matter
except title and list of effective diagrams.
3.6.2 Chapter 1, general. The following speciic requirements shall apply to this chapter:
3.6.2.1 Applicability. A listing of the models, types and series of vehicles or equipment if more than
one coniguration is covered (see 3.1.7).
3.6.2.2 Data accessing system. Text with supporting illustrations shall include:
a. An explanation of the SSSN and HLD number use.
b. How to ind the applicable wiring diagram.
c. How to ind the wiring effectivity.
d. How to use the wire list to determine wire replacement information such as wire type, length,
method of termination, crimping tool used, termination point, etc.
e. How to use the connection list to ind all wires of a terminal board, relay, connector, switch, etc.
3.6.3 Chapter 2, equipment list. All applicable descriptive text shall precede the equipment list. In addition
to the requirements of MIL-HDBK-863. the equipment list shall contain the applicable CAGE codes and
HLDs (equipment number designator) for each LRU described in the WD and SD manuals.
3.6.4 Chapter 3, wire harness and connection lists. All applicable descriptive text shall precede the
wire harness and connection lists. The wire harness list and a connection list shall be developed
according to MIL-HDBK-863.
3.6.5 Chapter 4 and subsequent, wiring diagrams. This
chapter shall contain an Index of effective
diagrams and point-to-point interconnect wiring diagrams,
with associated charts developed according to
MIL-HDBK-863. The index shall be located in the front
of each system wiring diagram. For combined
manuals, chapters shall be divided with a indicating only
the chapter number and system tile.
3.7 Schematic diagrams (SD) manual. The SD manual shall be prepared in single manual format or
separate manuals by system, as speciied by the acquiring activity (see 6.2w.) and shall be developed
according to MIL-HDBK-863.
a. Electronic media requirement: count restrictions do not apply.
b. Print media requirement: When speciied, the SD manual shall be combined with the WD or GS
manual unless this would cause the manual to exceed 800 s (400 sheets).
3.7.1 Front matter. Front matter shall be prepared in accordance with the requirements of MILSTD- 38784
and applicable requirements speciied herein (see 3.1), except there shall be no list of illustrations or
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business